You touch the screen to change the song, but nothing happens. You were sure that this Stereo would be a breeze, but it’s not working right.
When your touch screen car stereo starts acting up, it can be frustrating trying to figure out how to fix it. This post will walk you through the most common problems and show you how to fix them.
We’ll also give you some tips on keeping your touch screen car stereo running smoothly. So, we’ve got you covered whether your touch screen is frozen, unresponsive, or just not working properly.
With just a few simple steps, you’ll have your music playing again in no time!
Let’s get started!
- Reasons why your Stereo’s touchscreen is not working
- How To Fix A Touch Screen Car Stereo
- Additional Tips To Fix A Touch Screen Car Stereo
- Can a car touch screen be fixed?
- How do you reset a touch screen car?
- Why isn’t my screen working on my car?
- What causes a car stereo to stop working?
- Will factory reset fix my touch screen?
- How do I test my touch screen?
- Does replacing a screen fix ghost touch?
- Does screen replacement fix ghost touch on the car stereo?
Reasons why your Stereo’s touchscreen is not working
Several reasons why your car stereo’s touchscreen might not be working properly. Here are some of the most common issues:
- The screen is frozen or unresponsive
- The screen is cracked or shattered
- Water damage
- The touch screen is not calibrated correctly
- The wrong software is installed
- The touch screen is not clean
- There are bad pixels on the screen
- The touch screen is unresponsive to touch
- There is a problem with the touchscreen controller
- The car stereo’s battery is dead
- The fuse for the car stereo has blown
How To Fix A Touch Screen Car Stereo
If your touch screen car stereo is unresponsive, frozen, or not working properly, there are a few things you can try to fix.
1. Restart The Stereo
This may seem like an obvious first step, but sometimes all your touch screen car stereo needs is a restart. If your touch screen is unresponsive, try pressing and holding the power button for a few seconds to see if that restarts the system.
2. Check The Connections
Ensure all the wires and cables are properly connected to your touch screen car stereo. Sometimes, a loose connection can cause touch screen problems.
3. Update The Software
Out-of-date software can cause touch screen issues, so make sure you’re using the most recent version of your car stereo software. To update the software, you’ll usually need to connect your car stereo to a computer with an internet connection.
4. Factory Reset
If restarts and updates don’t fix the problem, your car’s touch screen radio may need to be reset. This will erase all the data from your Stereo, so be sure to back up any important files before resetting. To reset your touch screen car stereo, press and hold the power button for a few seconds. Then, from the menu, choose “factory reset.” Then wait for seconds until your Stereo gets fully reset.
5. Replace The Touch Screen
If none of the above steps works, you may need to replace the touch screen. This is usually a last resort, as touch screens can be expensive to replace. If you need to replace your touch screen, then you can check our post on the best double din head unit for sound quality, or best 10.1″ Android Car Stereo.
6. Clean The Screen
If your touch screen is unresponsive or not working properly, it might be dirty. Use a soft, dry cloth to clean the screen. Be sure not to use any harsh cleaners, as they could damage the screen.
7. Check The Temperature
If it’s cold outside, your touch screen may not work, and the cold can make the screen less responsive. Try bringing your car inside to a warm garage or using a portable heater to warm up the touch screen before you use it.
8. Use A Different Method
If your touch screen is still not working properly, you can try using a different method to control your car stereo. Many car stereos have buttons that you can use to control the volume and change the song. If your touch screen is unresponsive, you can use these buttons as an alternative method to control your Stereo.
9. Bring It To A Professional
If you’ve tried all of the above steps and your touch screen isn’t working properly, it’s time to bring it to a professional. A qualified technician will be able to diagnose the problem and fix it for you.
Additional Tips To Fix A Touch Screen Car Stereo
Here are a few tips to help you keep your touch screen car stereo running smoothly:
1. Keep your car stereo clean
Wiping down your car stereo regularly with a soft, dry cloth will help keep the screen clean and free of fingerprints.
2. Protect your touch screen
You can protect your touch screen from damage by using a screen protector. A screen protector is a clear film that you place over your touch screen, and it will help prevent scratches and other damage.
3. Avoid using in extreme temperatures.
If it’s very cold or hot outside, avoid using your touch screen car stereo. The extreme temperatures can make the screen less responsive.
4. Handle with care
Be careful when handling your touch screen car stereo. Dropping it or knocking it around can damage the screen.
5. Use a stylus
A stylus is a small, pen-like device that you can use to control your touch screen car stereo. Using a stylus will help to keep your screen free of fingerprints and smudges.
By following these tips, you can help to keep your touch screen car stereo working properly.
Can a car touch screen be fixed?
Yes, it is possible to fix the touchscreen of a head unit; however, in some cases, it is impossible to improve the touchscreen of the Stereo. If the screen is only cracked, then there are kits available that you can use to repair the screen. However, if the screen is severely damaged, it may need to be replaced.
How do you reset a touch screen car?
If your car has a touch screen, you can usually reset it by pressing and holding the power button for a few seconds. This will restart the system and clear any errors that may have caused the touchscreen to stop working properly. If this doesn’t work, you may need to consult your car’s owner’s manual or take it to a professional.
Why isn’t my screen working on my car?
There are a few reasons why your car’s screen might not be working. The first thing you should check is the fuse. If the fuse is blown, then it will need to be replaced. Another possibility is that the connection between the screen and the car’s battery is loose. Tighten any loose connections and see if that fixes the problem. If neither of those solutions works, you may need to replace the screen itself.
What causes a car stereo to stop working?
There could be a few reasons why your car stereo has stopped working. If you have an aftermarket stereo, it could be a problem with the wiring or a loose connection. If you have a factory stereo, it could be a problem with the amplifier or a blown a fuse. The best way to determine the cause of the problem is to take your car to a qualified mechanic or audio specialist.
Will factory reset fix my touch screen?
It depends. If your touch screen is unresponsive or not working the way it should, a factory reset may be able to fix the problem. However, if something is physically wrong with your touch screen, a factory reset won’t help.
Before doing a factory reset, make sure you back up all of your important data. A factory reset will erase all of your data and settings. Also, make sure your phone is charged and has a Wi-Fi or data connection before starting the process.
To do a factory reset, go to Settings > Backup & Reset > Factory Data Reset. Follow the on-screen instructions to complete the process.
How do I test my touch screen?
There are a few things you can do to test your touch screen. First, try pressing on the screen with your finger and see if it registers. If not, try using a stylus or another pointed object. You can also try tapping on the net or swiping across it. Another way to test it is to use an app like TouchTest to let you know if the touch screen is working properly.
Does replacing a screen fix ghost touch?
Yes, your screen’s ghost touch is likely caused by a malfunctioning screen, and replacing the screen should fix the issue.
Ghost touches can be caused by various issues, including a broken LCD, a faulty digitizer, or problems with the motherboard. If you’re experiencing ghost touches, it’s important to identify the root cause of the issue to find a solution.
Replacing the screen is usually the best solution for this type of problem. If you’re not comfortable doing it yourself, you can take your device to a repair shop and have them do it for you.
Does screen replacement fix ghost touch on the car stereo?
If your car stereo has a ghost touch issue, it most likely means that there is a loose connection somewhere within the system. This can be a relatively easy and inexpensive fix, but it will depend on where the fault is located and how much damage has been done.
You can expect to pay anywhere from $50 to $200 to have the problem fixed, but it’s always best to consult with a professional before making any decisions. They will be able to look at your specific system and give you an accurate estimate of what needs to be done. Good luck!